45′ High Cube General Purpose Container
45′ High Cube General Purpose Container
- Suitable for voluminous cargo up to max. 2.70 m (8′ 101/4″) height
- Units built with corner castings at 40 ft and 45 ft positions
- Various lashing devices with a permissible load of 1,000 kg (2,205 lbs) each on the top and bottom longitudinal rails and the corner posts
- Floor height 170 mm (ground level to interior floor surface, tolerance deviation possible)
- Consider over-height for inland transportation (e.g. bridges, clearances, tunnels etc.)
Inside dimensions | Door openings | Weights | Capacity | |||||
|---|---|---|---|---|---|---|---|---|
Length
mm ft | Width
mm ft | Height
mm ft | Width
mm ft | Height
mm ft | Max
gross kg lbs | Tare
kg lbs | Max
payload
kg lbs | m3 ft3 |
13,556 44′ 55/8” | 2,350 7′ 81/2“ | 2,667 8′ 9″ | 2,337 7′ 8″ | 2,565 8′ 5″ | 32,500 71,650 | 5,050 11,193 | 27,450 60,517 | 86 3,037 |
The above figures are the minimum internal dimensions and door openings for general purpose containers as
standardised in ISO 668.
It is important to note that there are some slight differences in the dimensions of shipping containers utilised between carriers so this information is to be used as a guide only. If you need further specific advice on the right type of container to utilise for your cargo please contact us.
If your cargo is too large to containerise then we can ship any heavy lift or oversize cargo via roll on roll off shipping services with Depth RoRo on rolltrailers.
