40′ High Cube Flat Rack Container
40′ High Cube Flat Rack Container
- Suitable for heavy loads and oversized cargo
- Extraordinary, very strong frame design with strong end walls allowing bracing and stacking
- Flatracks are equipped with spring-assisted collapsible flushfolding end walls and twistlocks to interlock 4 units into a 8′ 6″ high pile
- Usable as “tween decks” in cargo holds and on hatch covers for break bulk cargoes
- Numerous very strong lashing devices on longitudinal rails and base ends have a permissible load up to 5,000 kg (11,023 lbs) each
- Gooseneck tunnel on both ends of 40′ High Cube Flats
- The permissible payload of the Flatrack depends on the resting length of the cargo on the Flatracks side rails
- Maximum payload can only be used if cargo weight is distributed over the full length of the side rails
- If heavy loads are shorter, the payload is reduced.
- Heavy cargo must rest on the main girder
- Flatracks are delivered without stanchions
- Timber-treated according to Australian requirements
- Welding on Flatracks is not allowed
Show More
Inside dimensions | Weights | ||||||
---|---|---|---|---|---|---|---|
Length between corner posts
mm ft | Width between corner posts
mm ft | Width over floor/bottom side rails
mm ft | Height floor to top face (inside height) mm ft | Height of bottom
mm ft | Max. gross kg lbs | Tare
kg lbs | Max payload kg lbs |
11,652 38′ 23/4“ | 2,148 7′ 1/2“ | 2,347 7′ 83/8“ | 2,248 7′ 41/2“ | 648 2′ 11/2“ | 50,000 110,230 | 5,950 13,117 | 44,050 97,113 |