20′ Flat Rack Container
20′ Flat Rack Container
- Suitable for heavy loads and oversized cargo
- Equipped with fork-lift pockets for loaded containers
- Numerous very strong lashing devices on the corner posts, longitudinal rails and on base ends
- Lashing devices have a permissible load up to 5,000 kg (11,023 lbs) each
- Maximum payload can only be used if cargo weight is distributed over the total floor area of Flatrack
- If heavy loads are shorter, the payload is reduced.
- Flatracks are delivered without stanchions. If stanchions are required, please inform us upon booking
- Flatracks are equipped with spring-assisted collapsible end walls and twistlocks to interlock 7 units into a 8’6″ high pile
- Timber-treated according to Australian requirements
- Welding on Flatracks is not allowed
Inside dimensions | Weights | ||||||
|---|---|---|---|---|---|---|---|
Length between corner posts
mm ft | Width between corner posts
mm ft | Width over floor/bottom side rails
mm ft | Height floor to top face (inside height) mm ft | Height of bottom
mm ft | Max. gross kg lbs | Tare
kg lbs | Max payload kg lbs |
5,612 18′ 47/8“ | 2,227 7′ 35/8“ | 2,194 7′ 2 3/8“ | 2,219 7′ 33/8“ | 370 1′ 21/2“ | 34,000 74,957 | 2,740 6,041 | 31,260 68,916 |
The above figures are the minimum internal dimensions for flatracks. The measurements differ by manufacturer and model.
It is important to note that there are some slight differences in the dimensions of shipping containers utilised between carriers so this information is to be used as a guide only. If you need further specific advice on the right type of container to utilise for your cargo please contact us.
If your cargo is too large to containerise then we can ship any heavy lift or oversize cargo via roll on roll off shipping services with Depth RoRo on rolltrailers.
